The diagram below shows the process by which used glass bottles and jars are recycled to make new containers.
Summarise the information by selecting and reporting the main features, and make comparisons where relevant.
Why this is Band 6: Covers all stages in the correct order with some sequencing words. It has no overview, and the writer repeats 'and it/they are' many times. There are article errors ('the old glass', 'In next step', 'temperature of furnace'), and 'People can buy them' adds information that the diagram doesn't show.
The diagram shows how the old glass bottles and jars are recycled and how new containers are made. There are ten steps in this process.
First, used bottles and jars are collected and they are taken to a treatment plant. In the plant, the labels and caps are removed from them. After that the glass is sorted according to the colour. Then it is crushed and it becomes small pieces, which are called cullet.
In next step, the cullet is mixed with some other materials, which are sand, soda ash and limestone. This mixture is then melted in a furnace, and the temperature of furnace is 1,500 degrees. When it is melted, the glass goes into moulds and becomes new containers. After this, the new containers are cooled and they are inspected. Finally they are delivered to shops, where people can buy them. After the people use them, the empty containers are collected again, so the process starts again from the beginning.
162 words
Why this is Band 7: A clear overview identifies the process as circular, and the stages are grouped in logical paragraphs. Passive forms are used well, and linking is good. Vocabulary follows the diagram quite closely, with less variety than in Band 8.
The diagram illustrates the stages involved in recycling used glass bottles and jars in order to produce new containers.
Overall, it is a circular process consisting of ten stages. It begins with the collection and preparation of used glass, which is then melted and shaped, and it ends with the new containers being delivered and eventually returned.
At the beginning of the process, used bottles and jars are collected and transported to a treatment plant, where their labels and caps are taken off. The glass is then sorted by colour before being crushed into small pieces known as cullet.
In the following stage, the cullet is mixed with three other raw materials, namely sand, soda ash and limestone. This mixture is heated in a furnace at a temperature of 1,500°C until it melts. The molten glass is moulded into new containers, which are then cooled and checked for quality. Finally, the finished products are delivered to shops. After they have been used, the empty containers are collected again, and the whole cycle is repeated.
174 words
Why this is Band 8: The overview divides the process into three phases, and this organises the whole answer. Sentence structures are varied and precise ('Having been combined with', 'at which point'), and passives are used naturally. Vocabulary paraphrases the diagram ('stripped away', 'separated', 'fragments', 'inspected for defects').
The diagram outlines how used glass bottles and jars are turned into new containers through a ten-stage recycling process.
The process is cyclical, with the finished products ultimately returning to the point at which it started. It falls into three broad phases: the collection and preparation of waste glass, the manufacture of new containers, and finally their distribution.
The first phase begins when discarded bottles and jars are collected and taken to a treatment plant. Here, any labels and caps are stripped away, and the glass is separated according to colour. It is then crushed into small fragments, referred to as cullet.
The manufacturing stage follows. Having been combined with three raw materials, namely sand, soda ash and limestone, the cullet is melted in a furnace heated to 1,500°C. The resulting liquid glass is shaped in moulds to create new containers, which are subsequently left to cool and inspected for defects.
Once they have passed this inspection, the containers are delivered to shops. When they have been used and thrown away, they are collected once more, at which point the cycle begins again.
183 words
How the examiner marks this
Four criteria, each worth 25% of the band. Task 1 counts for one third of your Writing band.
1Task achievement
2Coherence and cohesion
3Lexical resource (vocabulary)
4Grammatical range and accuracy
What makes the difference
Overview: Band 6 only says there are ten steps; Band 7 says it is circular; Band 8 also identifies three distinct phases.
Structure: Band 6 uses long lists of steps; Bands 7 and 8 group the stages into paragraphs.
Passive voice: Band 6 repeats 'are collected and they are'; Band 8 uses 'Having been combined' and 'which are subsequently left to cool'.
Sequencing: Band 6 relies on 'First', 'Then', 'After that'; Band 8 uses 'The manufacturing stage follows' and 'Once they have passed this inspection'.
Vocabulary: Band 8 does not copy the labels but rewords them: 'removed' becomes 'stripped away'; 'checked' becomes 'inspected for defects'.
Tips for this task
A process diagram has no numbers to compare, so your overview should give the number of stages, the start and end, and whether it is a cycle.
Use the present simple passive for most verbs: 'the glass is crushed'.
Vary how you link stages. Use 'before being crushed', 'once melted' and 'which are then'.
Mention every stage, but combine small ones into a single sentence.
Do not add your own knowledge, such as why recycling is good for the planet.
Real people. Real approvals.
A licensed team that has guided thousands of Indians to their visas and admissions.