Long before engines and motors, people multiplied the strength of their own muscles with a handful of ingenious devices known as the simple machines. Each works in its own way, but all share one purpose: to make a hard job easier, usually by letting a small effort move a large load. The first and perhaps most basic is the lever: a rigid bar that turns about a fixed point called the fulcrum. By pressing down on the long end, a person can raise a heavy weight on the short end with surprisingly little effort, and a simple crowbar prising up a rock is the lever at work.
The second device is the pulley, a wheel with a groove around its rim through which a rope is run. In its simplest form, by pulling down on one end of the rope a person can raise a load tied to the other, which conveniently changes the direction of the effort from a downward pull to an upward lift. When several pulleys are combined into a block and tackle, the force needed to lift a given weight is reduced still further, so that one person can raise a very heavy load.
The third is the inclined plane, which is nothing more than a slope or ramp. To lift a heavy barrel straight up onto a cart would take great strength, but by rolling or dragging it up a gently rising ramp the same height can be gained with far less force, although over a longer distance. This simplest of all the machines has no moving parts whatever, yet it has eased the raising of heavy loads since the earliest times.
The fourth device is the wheel and axle, in which a large wheel is firmly fixed to a smaller rod, the axle, so that the two turn together. Turning the large wheel by its rim makes the axle turn with much greater force, which is the principle behind a great many familiar tools, from the handle that winds a bucket up from a well to the steering wheel of a car. It should not be confused with a wheel that merely rolls freely.
Last comes the screw, which is really a clever variation on an earlier idea: it is, in effect, an inclined plane wound round and round a central cylinder to form a spiral thread. As the screw is turned, this winding slope pulls it steadily forward into wood or metal with enormous force, or raises water or other material along the thread. By turning rotation into a powerful straight-line push, the screw does work that would otherwise be very hard indeed.
Match each statement with the correct Machine, A-E. You may use any letter more than once.
1. It is a rigid bar that turns about a fixed point.
2. It is a grooved wheel through which a rope is run.
3. It is simply a slope or ramp with no moving parts.
4. A large wheel is firmly fixed to a smaller rod.
5. It is really an inclined plane wound around a cylinder.
6. A crowbar prising up a rock is an example of it.
7. Combined into a block and tackle, it reduces the force needed.
8. It lets a load be raised over a longer distance with less force.
9. A well handle and a car's steering wheel both use it.
10. It turns rotation into a powerful straight-line push.
A licensed team that has guided thousands of Indians to their visas and admissions.
Jitender SinghFounder & Managing Director
Vikram SinghHead – Quality & Operations
SanjayHead – Tourist Visa Operations
TejaswaniHead – Counselling Team
MahimaHead – Visa Filing & Processing
Pratigya DuttaHead – Student Visa ProcessingFree, no-pressure guidance from a real counsellor who handles your case end to end — from documents to decision.