The diagram below shows the process by which used aluminium drinks cans are recycled.
Summarise the information by selecting and reporting the main features, and make comparisons where relevant.
Why this is Band 6: A clear, accurate description of all eight stages, in the correct order, with a sound overview and good use of the passive. The sequencing language is simple but effective.
The diagram shows how used aluminium drinks cans are recycled and turned into new cans. Overall, there are eight stages, beginning with the collection of old cans and ending with the making of brand new ones, so the whole thing is a cycle.
At the first stage, used cans are collected and sorted, to separate the aluminium from other materials. Next, the cans are cleaned and crushed into large blocks called bales, which are easier to transport. After this, the bales are shredded into small pieces.
In the fourth stage, these pieces are heated in order to remove any coatings, such as paint or plastic, from the metal. The clean pieces are then melted in a very hot furnace, which turns the solid aluminium into a liquid.
In the next stage, this molten metal is poured into moulds and cast into large blocks called ingots. The ingots are then rolled into thin sheets. Finally, these sheets are used to make new cans, and the whole process can begin again.
169 words
Why this is Band 7: A well-organised answer with a clear overview that identifies the cyclical nature, accurate stages and good linking ('whereupon', 'subsequently').
The diagram illustrates the series of stages involved in recycling used aluminium drinks cans into new ones. Overall, the process consists of eight distinct steps and, since it ends by producing the very cans with which it began, it forms a continuous cycle rather than a one-way sequence.
At the outset, used cans are collected and sorted so that the aluminium is separated from other waste. The sorted cans are then cleaned and compressed into large blocks, known as bales, after which these bales are fed into a machine that shreds them into small pieces.
The following stage is a crucial one: the shredded pieces are heated in order to burn off any paint or plastic coatings. Once the metal has been cleaned in this way, it is melted down in a furnace at very high temperatures until it becomes a liquid.
In the final stages, the molten aluminium is cast into solid blocks called ingots, which are subsequently rolled out into thin sheets. These sheets are then used to manufacture new cans, whereupon the entire process can begin again.
180 words
Why this is Band 8: A sophisticated response built around the insight that the process is circular ('its final product is identical to its raw material'), with precise, varied language and well-grouped stages.
The diagram sets out the eight stages by which discarded aluminium cans are reprocessed into new ones. The single most striking feature is that the sequence is circular: its final product is identical to its raw material, so that in principle the same aluminium can be used over and over without end.
The process opens with collection, as used cans are gathered and sorted from other refuse. These are then cleaned and compacted into dense bales for ease of handling, before being shredded into small fragments at the next stage.
A key preparatory step follows, in which the fragments are heated specifically to strip away any surface coatings of paint or plastic, leaving pure metal. This cleaned aluminium is then melted in a furnace until fully molten, whereupon it is poured into moulds and allowed to solidify into large ingots.
The closing stages are essentially shaping ones: each ingot is rolled under pressure into thin sheets, and these sheets are finally pressed into new cans. At this point the cycle closes, and the newly made cans are ready to re-enter the same process once they have been used.
188 words
How the examiner marks this
Four criteria, each worth 25% of the band. Task 1 counts for one third of your Writing band.
1Task achievement
2Coherence and cohesion
3Lexical resource (vocabulary)
4Grammatical range and accuracy
What makes the difference
Overview: Band 6 states there are eight stages in a cycle; Band 8 stresses the metal is reused with no end point.
Sequencing: 'Next, After this' (6), 'Once... whereupon' (8).